SEALING & MAINTENANCE
Choose the correct products for your specific area
Cement tiles have to be sealed in order to protect them from dirt and water.
We recommend the following sealing and maintenance products, you can order these along with your tiles.
Questions?
Please contact our team info@marrakechdesign.se
Or call our office +46 706-66 7520
Bathrooms (including outdoor installation)
Cement tiles that are being installed in any kind of wet area (including outdoor installation) require sealing with Natural Finish Stone Sealer (Step 1), prior and after grouting.
Only sealing with Step 1 is required for tiles that are installed in shower areas.
Hallways, kitchens, splashbacks, or commercial spaces
Cement tiles that are being installed in areas such as hallways, kitchens, splashbacks, or commercial spaces require sealing with Natural Finish Stone Sealer (Step 1). prior grouting, followed by Satin Finish Surface wax (Step 2.) after grouting.
Sealing (step 1) and top coat (step 2) is required for the above areas.
Step 1. Sealing
Natural Finish Stone Sealer by LTP EcoProtec
(recommended for bathrooms including shower areas)
A natural finish water based impregnating sealer. Minimal change to surface character. Helps protect against staining. The treated stone strongly repels water, oil and grease. This product allows surfaces to breathe.
This products should be applied until the tiles are fully saturated, normally 1-3 coats. Additional coats of Natural Finish Stone Sealer should be applied once a year or when needed.
0,5L: One bottle covers about 2-3 sqm, 1-4 coats.
Price for 1L is 299 SEK
1L: One bottle covers about 6-7 sqm, 1-4 coats.
Price for 1L is 499 SEK
5L: One bottle covers about 25-30 sqm, 1-4 coats.
Price for 1L is 1899 SEK
Natural Finish Stone Sealer: Application guide
Natural Finish Stone Sealer: Health, Safety and Environmental information
Step 2. Top coat (not suitable for shower areas)
Satin Finish Surface Wax by LTP EcoProtec
Water based finishing wax. For interior use. Enhances appearance and further protects surfaces that are impregnated with EcoProtec Natural Finish Stone Sealer.
1L: One bottle covers about 20 sqm, 1-2 coats.
Price for 1L is 299 SEK.
5L: One bottle covers about 80-100 sqm, 1-2 coats.
Price for 1L is 1195 SEK.
Satin Finish Surface Wax: Application guide
Satin Finish Surface Guide: Health, Safety and Environmental information
MAINTENANCE
Maintain your handmade cement tiles with the correct products. For weekly cleaning we recommend a natural floor soap such as Natural Stone & Porcelain Aftercare Cleaner. Never use acids to clean the tiles as they will damage them: includes bleach, vinegar, epoxy grout removers, citrus soaps, solvent green etc.
Natural Stone & Porcelain Aftercare Cleaner
High quality every day after care floor wash that is suitable for interior and exterior use.
A gentle cleaner especially formulated to clean natural stone, porcelain and ceramic without damaging the grout or tile, leaving the floor with a fresh clean fragrance. Suitable for use on both sealed, un-sealed, polished and unpolished surfaces.
Price for 0,5L is 119 SEK
Price for 1L is 199 SEK
Price for 5L is 499 SEK
Natural Stone & Porcelain aftercare cleaner: Application guide
Stone & Tile Intensive Cleaner
A high performance intensive cleaner for stripping and cleaning. Helps remove over applied impregnating sealer, surface sealers, oxidised linseed oil and other mineral oils.
Price for 1L is 299 SEK
Stone & Tile Intensive Cleaner: Application guide
Questions?
Please contact our team info@marrakechdesign.se
Or call our office +46 706-66 7520